Before Initial Use; Attaching And Detaching Accessories - Cleanmaxx GW906-S60 Mode D'emploi

1
1 Nozzle adapter (is always plugged
onto the suction opening fi rst!)
2 Small round brush
3 Small long brush
4 Adapter for the 8 accessory nozzles
(is plugged onto the nozzle adapter!)

Before Initial Use

CAUTION!
• Keep children and animals away from the packaging material. There is a danger of
suffocation!
• Unpack all parts and check the items supplied to make sure they are complete (see the
"Items Supplied" chapter); also check for transport damage. If you fi nd any damage
to the components, do not use them (!), but contact our customer service department.
• Please note: Possible dirt residues in the dust container are attributable to the fact that
this device is tested prior to delivery and do not represent any defect with the device!

Attaching and Detaching Accessories

CAUTION!
• Before you attach or detach any accessories, ensure that the device is not connec-
ted to the mains power.
• The nozzle adapter (1) (see the "Items Supplied" chapter, "Accessories" section,
"Nozzle adapter and 8-piece accessory set" point) is always plugged onto the suction
opening fi rst, regardless of whether you are using one of the three large nozzles (or
the extension suction tubes) or the small accessory nozzles! For the small accessory
nozzles, the accessory nozzle adapter (4) is also plugged onto the nozzle adapter (1)!
Attaching/Detaching the Floor Nozzle, Brush Nozzle and Crevice Nozzle
1. Plug the nozzle adapter onto the suction opening.
06439_de-en-fr-nl_V1.indb 19 06439_de-en-fr-nl_V1.indb 19
19
2 3 4 5
5 Small suction tube (2x)
6 Narrow suction tube
7 Small crevice nozzle
8 Small angled nozzle
6 7 8
15.06.2015 14:16:46 15.06.2015 14:16:46
EN