"Purge" Function - Faema E71 Utilisation Et Installation

Steam dispensing with lever control (20)
The steam lever offers some special features that make it extremely useful.

"Purge" function

One of the most interesting features is the "Purge" function,
which makes it possible to eliminate any condensation
that may have formed when a medium/long period of time
passes between steam dispensing.
To activate the "Purge" function, push the steam lever
towards the cup tray and keep it in this position for several
seconds. When the lever is released, it automatically returns
to the starting position.
Modularity
Another valuable function offered by the steam lever is
modular dispensing.
When the steam lever is pushed upwards, there are 2
different positions for the lever, offering two different levels
of steam intensity:
- position V1 (half way): 50% strength, to heat medium/
small amounts of beverages;
- position V2 (fully up): 100% strength for large amounts
of beverages.
Scalding
insulating devices (A) to move the water and
steam wands.
Completely immerse the left (9) steam nozzle into the
container with the liquid to be heated and push the steam
control lever (20) upwards in the appropriate position.
Wait until the liquid has reached the desired temperature,
then lower the steam command lever to stop the issue of
steam.
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing phase:
- Using a clean sponge, wash with hot water removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully activate steam dispensing at least once.
02_E71_1USO_1646.indd 20
hazard! Use the appropriate
"Purge"
50%
20
A
9
20 EN
100%
17/11/2016 13:41:10