Sequential Washing - Faema E71 Utilisation Et Installation

SEQUENTIAL WASHING

Procedure to follow at the end of the working day on all groups or when signalled by the machine.
1
EXECUTE GROUP 1
WASH
The sequential washing mode appear
on the display.
4
Insert the rubber disk into the lter
holder with its lter.
7
EXECUTE GROUP 1
WASH
Press the icon
10
REMOVE FILTER HOLDER
GROUP 1
push
At the end of the group 1 wash cycle,
the message "REMOVE FILTER
HOLDER GROUP 1" will appear.
12
GR 1 RINSE
065%
The message "GR.1 RINSE"will be
displayed followed by the percentage
of completion.
02_E71_2PRG_1646.indd 32
2
Remove the filter holder from the
coffee group.
5
Pour in a packet or dosing cupful of
detergent powder.
8
. Press the icon
11
Remove the lter holder and press the
icon
13
At the end of the group 1 rinse cycle,
the message "EXECUTE GROUP 2
WASH" will appear.
INSERT FILTER HOLDER
GROUP 1
push
.
.
EXECUTE GROUP 2
WASH
push
32 EN
3
Using a brush, clean the cover gasket.
6
H o o k t h e f i l t e r h o l d e r
Group 1.
9
GR 1 WASH
015%
Group 1 washing
cycle will start.
T h e m e s s a g e
"GR.1 WASH"will
a p p e a r o n t h e
display followed
by the percentage
of completion.
The same information will also appear
on the group display.
14
Repeat the operations described
above for all machine groups.
Do not remove the lter holder during
coffee dispensing.
t o
17/11/2016 13:47:46