Correct Weighing - Seca 984 Mode D'emploi Et Garantie

Correct weighing

The seca 984 can be started with preloads up to 300 kg. This means it is possible to start
the scale with the bed set up. Please bear in mind that the total load of 500 kg shown on
the scale should not be exceeded and that the scale will respond by displaying "
an error message if the total load is exceeded.
– Press the Start key.
se(A 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and
ready to use.
The plug symbol
play.
The scale remains in permanent opera-
tion until it is switched off.
– If necessary, switch the weight display
(see page 23).
– Get the patient into bed.
– Read patient weight off the digital dis-
play.
– To switch off the scale, press the Start
key again.
Switching the weight display
The weight display can be switched between kilograms (kg) and pounds (lbs) or. pounds
(lbs) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilograms and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
To switch the weight display between
pounds and stones, press the kg/lbs/
sts key for 2 seconds.
The lbs or sts display lights up.
Model 984
0. 0 0
and appear con-
appears in the dis-
ST0P
" or
23
GB