Correct Weighing - Seca 856 Mode D'emploi

Correct weighing

– Press the Start key with no load on the
scale.
se(A 8. 8 . 8 . 8 . 8 .
, and
utively in the display (or for the lb:oz set-
0:00. 0 0
ting: ). The scale is then
automatically set to zero and ready to
use.
– If necessary, switch the weight display
(see page 14).
– Place the item for weighing on the scale.
– Read the weighing result off the digital
display.
– If a load greater than 5,000 g or 11 lbs
is placed on the scale,
the display.
– To switch off the scale, press the Start
key again.
Switching the weight display
The weight display can be switched between grammes (g) and ounzes (oz).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
grammes and ounces, hold down the
g/oz key for approx. 2 seconds.
– The g or lb:oz display lights up.
Automatic switch-off/economy mode
The scale switches off automatically after 30 seconds.
When the scale is loaded or when the Hold function is activated, the scale switches off
after 3 minutes.
14
0. 0
appear consec-
St0P
appears in