Controls And Displays; Correct Weighing - Seca 869 Mode D'emploi Et Garantie

4. Operation

Controls and displays

The controls and display are in the display part.
Switch scale on and off
press briefly
hold down
in function menu s increase value
press briefly
hold down
in function menu s decrease value
Activating the BMI function, Confirmation

Correct weighing

– Press the start key with no load on the
scale.
se(A, 8. 8 . 8 . 8 . 8 .
consecutively in the display. The scale is
then automatically set to zero and ready
to use.
– If necessary, switch the weight display
(see page 21).
– Read the weighing result off the digital
display.
– If a load greater than 250 kg, 550 lbs or
39 sts is placed on the scale,
appears in the display.
– To switch off the scale, press the start
key again.
20
s switch between kg and lbs
s switch between lbs and sts
s activate/deactivate hold function
s set display to zero, activate/deactivate tare function
0. 0
and appear
St0P