Correct Weighing - Seca 767 Mode D'emploi Et Garantie

Correct weighing

– Press the Start key with no load on the
scale.
, and
se(a 8. 8 . 8 . 8 . 8 .
secutively in the display. The scale is
then automatically set to zero and ready
to use.
– If necessary, switch the weight display
(see page 17).
– Stand on the scale and keep still.
– Read the weighing result off the digital
display.
– If a load greater than 200 kg or 450 lbs
is placed on the scale,
the display.
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable/non-
chargeable batteries or whether it is connected to the mains.
– Operation on rechargeable/non-chargeable batteries: automatic shut-down after 30
seconds.
– With mains operation: shut-down only via keypad.
Model 767
All manuals and user guides at all-guides.com
appear con-
0. 0 0
appears in
St0P
GB
17