Setting Up The Scale; Correct Weighing - Seca 382 Mode D'emploi

– Open the battery compartment lid and
insert the batteries supplied according
to the polarity shown on the battery
compartment.
Check that polarity is correct!
– Now close the battery compartment
cover again carefully.

4. Setting up the scale

– Place the scale on a level and stable
surface. Then position the tray as
shown on the base of the scale and pull
forward until the tray is heard to snap
into place, and the release button is in
the top position.
The tray is now securely interlocked
with the base.
– To remove the tray just press the re-
lease button hard and slide back the
tray.
5. Operation

Correct weighing

– Press the START key with no load on
the scale.
SE(A 88888
, and
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– If necessary, switch the weight display
(see page 12).
Model 382
0. 0 00
appear con-
11
GB