Correct Weighing - Seca 336 Mode D'emploi

5. Operation

Correct weighing

– Press the Start key with no load on the
scale.
SE(A 88888
, and
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– Place the baby on the scale.
– Read the weighing result off the digital
display.
– To switch off the scale, press the Start
key again.
If the scale is operated with a mains unit,
the symbol appears in the display.
Automatic switch-off/economy mode
To save energy, a scale with no load on it switches off automatically after approx. 5 min-
utes. In mains operation, the scales remain switched on permanently.
Taring weight display (TARE)
The tare function is useful if an additional weight (such as cloths or a pad on the weighing
surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the scale
and press the button TARE.
The note "NET" appears.
– Wait until the display stops flashing and
0. 0 00
shows .
– You can now perform as many
weighing operations as you like with this
additional weight.
– TARA is deactivated by pressing the
button TARE once again, or by
switching the scales off.
Important!
The maximum additional weight is 10 kg. The maximum weight which can be displayed
is reduced by the weight of the objects already placed on the scale.
14
0. 0 00
appear con-