Ending The Hair Removing Session; Selecting The Energy Level - Silk-n Infinity H3101 Mode D'emploi

On low energy levels, the device needs only about 1 to 1.5 seconds to charge
up again between the individual light pulses.

Ending the hair removing session

1. Press the
the button go out.
2. Unplug the mains adapter from the wall socket.
3. Clean and disinfect the device as described in the chapter "Cleaning,
disinfecting and storage".

Selecting the energy level

The energy level determines the intensity of the light pulse delivered to your skin.
You can set the energy level to 5 settings, each represented by indicator lights.
When the device is switched on the energy level is automatically set to the
lowest level (only the indicator light for energy level 1 comes on).
Although a higher energy level may be more effective for hair removal, it also
increases the risk of complications. In this case, do not use the device with the
gliding method; only use the pulsating method!
To select the appropriate energy level, first individually test each area of the
body to be treated:
1. Begin with the lowest energy level 1. If you do not experience any
discomfort on the treated area after turning on the light pulse, increase
the intensity by pressing the
pulse on a different area.
2. Increase the energy levels one by one until you find the setting which you
find still comfortable.
button until the device turns off. All indicator lights around
button to level 2. Perform the next light
78 | en