Skin Protection; Eye Protection; Exposure To The Sun - Silk-n Infinity H3101 Mode D'emploi

3.1 Skin protection

Light-based hair removal is not suitable for tanned skin.
The device comes with a built-in skin colour sensor (#3) that is
designed to measure the complexion of the applied surface and
enables energy levels according to skin complexion.
Furthermore, the treatment surface
of light are delivered, is recessed inside the device. This enables
the device to protect your skin by avoiding direct contact
between the treatment surface

3.2 Eye protection

The device has a built-in safety feature for eye protection. It has
been designed so that a light pulse cannot be emitted when
the treatment surface
enables treatment only when the treatment surface
contact with the skin.

3.3 Exposure to the sun

U
Sun exposure includes constant unprotected exposure to
direct sunlight for over 15 minutes, or constant unprotected
exposure to diffuse sunlight for over 1 hour.
U
Do not use on tanned skin after recent sun exposure,
including tanning machines. Using the device on skin that
has been recently exposed to sunlight can result in adverse
effects such as burns, blisters, and skin colour changes
(hyper- or hypopigmentation).
U
Avoid further exposure to the sun for 4 weeks before
and 2 weeks after your treatment. This is because higher
quantities of melanin expose the skin to greater risk when
using any method of light-based hair removal. This applies
to all skin types, even those that don't seem to tan quickly.
(#2)
, and the skin.
(#2)
is facing open air. The safety feature
(#2)
41
, through which pulses
(#2)
EN
is in