First-Time Use; Connecting The Device; Use - Silk-n Infinity H3101 Mode D'emploi

Please also read the sections "Selecting the energy level" further
back in this chapter, and the next chapter "During and after use"
before using the device for the first time.

Connecting the device

1. Remove the device and mains adapter from the packaging.
2. Insert the connecting plug of the mains adapter into the connection socket
on the device.
3. Insert the mains adapter into an easily accessible wall socket. All indicator
lights around the
energy level indicator lights will go out and only the blue Bluetooth
cator light will flash. The device is ready for use.
If no connection with a smartphone or tablet is established (see chapter
"Establishing a Bluetooth
also go out automatically after a short time. If a connection is successfully
established, the light will remain on.

Use

WARNING – risk of injury
If your skin blisters or burns, stop using immediately!
The skin should be shaved, clean, dry and free of any antiperspirants or
deodorants.

First-time use

button will light up at once for a short time. Then the
®
connection"), the Bluetooth
74 | en
®
indi-
®
indicator light will