Power Unit; Checking The Engine Oil Level; Replacing The Engine Oil - Yamaha F6AMH Manuel D'entretien

POWER UNIT

POWER UNIT

CHECKING THE ENGINE OIL LEVEL

Check:
Engine oil level


(At engine stopped)
a
Above
fuel or water mixed with the engine
oil. If no abnormality is found, drain
the oil until the level is between
b
and .
b
Below
the level is between

REPLACING THE ENGINE OIL

1. Remove:
Oil filler cap 1


Drain plug 2


2. Install:
Drain plug 2


Drain plug:
24 N m (2.4 kgf


3. Fill:
Engine oil 3


(into the crank case)
Recommended engine oil:
4-stroke engine oil
API: SE, SF, SG or SH
SAE: 10W-30, 10W-40
Oil quantity:
800cm
4. Install:
Oil filler cap 1


5. Check:
Engine oil level


Refer to "CHECKING THE ENGINE
OIL LEVEL"
NOTE:
Run the engine for several minutes, turn


it off, and check the oil level.
If the engine oil is still not at proper level,


add/drain as needed.
3-14
Check if there is any

Add engine oil so that

a
and
m, 17.8 ft



3
(27.0 US oz, 28.2 lmp oz)
a
b
.
lb)