Using Your Appliance; Adjusting The Display Contrast; Demo Mode - Atag ZX4570G Mode D'emploi

USING YOUR APPLIANCE

Adjusting the display contrast

-
+

Demo mode

EN 12
None of the buttons can be activated.
To reactivate the display, press the knob.
The oven display is operational once again and you can start cooking again.
Set the time to 0h10 (see "Resetting the
• Press the temperature button until '-CO-' is displayed.
• Adjust the contrast, using the knob.
• Press the knob to confirm.
Set the time to 0h00 (see "Resetting the time")
• Press the 'TEMPERATURE', 'TIME' and 'STOP' buttons
simultaneously for minimum 10 seconds until 'DEMO' appears in
the display.
• To return to normal mode, set the time to "0h00" and press the
'TEMPERATURE', 'TIME' and 'STOP' buttons again until "DEMO"
disappears from the display
Note
When the oven is in DEMO mode the heating elements are not operative.
time")