Atag ZX4570G Mode D'emploi page 107

MAINTAINING AND CLEANING
2
L
R
P Y R O L Y T I C
• If necessary, remove all the door's inner glass panels. This unit is
made up of one or two glass panels depending on the model, with a
black rubber buffer in each corner.
• After cleaning, replace the four rubber corners, taking care to follow
the markings on the glass
• Place the interior glass unit in the door, so that L and R are on the
hinge side.
• If your oven has just one interior glass, this will be found next to the
clip-on glass.
• Clip in the final glass by placing the "PYROLYTIC" marking towards
you.
• Remove the red plastic stop.
Your appliance is now ready for use again.
EN 23