Replacing The Oven Lamp - Atag ZX4570G Mode D'emploi

MAINTAINING AND CLEANING

Replacing the oven lamp

Lamp
Glass panel
Bulb
EN 24
Warning
Make sure the appliance is disconnected from the power before
replacing the lamp in order to avoid the risk of electric shock. Change
the lamp only when the appliance has cooled down.
ZX4570G
• Remove the wire shelf supports (see the section "Removing the
wire shelf supports").
• Use the red stop as a lever to remove the glass.
• Remove the bulb.
• Replace the bulb, then replace the glass and reconnect the oven.
ZX6570G
The bulb is located on the ceiling of your oven's cavity.
• Unscrew the view port counter-clockwise,
• Pull out the bulb.
• Replace the bulb then replace the view port and reconnect your
oven.
Tip
To unscrew the view port and the light, use a rubber glove, which will
make disassembly easier.
Bulb specification:
25W, 220-240 V~, 300 °C
G9.