How To Use Pyrolysis - Atag ZX4570G Mode D'emploi

MAINTAINING AND CLEANING

How to use pyrolysis

EN 20
Tip
You should not wait until the oven is heavily coated in grease to carry
out a cleaning cycle.
Note
Remove cookware and the wire shelf supports from the oven and clean
up any major spills.
Immediate pyrolysis
• Check if the programmer is displaying the time of day, and that it is
not flashing.
You can choose between 3 pyrolysis cycle times:
• Pyrolysis time 1 hour 30 minutes.
• Pyrolysis time 1 hour 45 minutes.
• Pyrolysis time 2 hours.
• Select the PYRO mode using the knob.
The 'P' symbol flashes in the display
• Confirm the selection by pressing the knob.
• Select the pyrolysis cycle time, using the knob.
Example: pyrolysis cycle of 1hr30 mins.
• Confirm the selection by pressing the knob.
The pyrolysis cycle begins. The time begins to count down immediately
ist has been set.
During pyrolysis, the LOCK (key) symbol is displayed in the programmer
to indicate that the door is locked and the door remains locked until the
oven has cooled down. Then, the lock (key) symbol switches off.
When pyrolysis finishes, 0:00 flashes.
Note
When the oven is cool, use a damp cloth to remove the white ashes.
The oven is clean again and ready for further cooking operations.