Troubleshooting; Further Instructions - Rotel AroMatica Mode D'emploi

300701 AroMatica755_Inhalt.qxd

7. Troubleshooting

Problem
It is not possible
to draw hot
water or steam.
Too little milk foam – You are using the wrong kind
or liquid foam.
Coffee just drips
out.
The coffee is
missing its
«foamy layer».
Loud noise from
the coffee mill.
Decalcifying pro-
gram will not start.
If you are unable to fix the problem yourself, please call our Service Hotline: 062 787 77 00

8. Further instructions

Disposal
Please return your coffee machine to your local dealer, the service shop or to Rotel AG
for proper disposal.
Professional care and maintenance
Filter cartridge for fresh water / Cleaning tablets / Liquid Descaler «Calc Clean»
You can order these cleaning and maintenance supplies by sending us the enclosed
order card or you can contact us directly at:
Rotel AG, Oltnerstrasse 93, 4663 Aarburg
Tel: 062 787 77 00
Fax: 062 787 77 10
office@rotel.ch
www.rotel.ch
21.9.2010
Meaning
– The jet (12) is plugged up.
of milk.
– Milling is set too fine.
– Coffee is milled too fine.
– Not the right type of coffee.
– The beans are not fresh ground. – Use fresh ground beans.
– The milling fineness is not right – Fix the milling fineness
for the coffee bean type.
– Foreign object in the milling
works, for example a pebble.
– The filter is programmed to YES. – Program the filter to NO (see 4.2).
13:40 Uhr Seite 41
What to do
– Clean jet thoroughly.
– Use cold full-cream milk
– Set the milling to a coarser setting
(see 2.3).
– Use coarser milled coffee.
– Change the type of coffee.
(see 2.3).
– Contact the Service Hotline
(see below). You can still use ground
coffee.
41