Programming; My Coffee» Individual Programming; Filter; Filter Use - Rotel AroMatica Mode D'emploi

Masquer les pouces Voir aussi pour AroMatica:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

300701 AroMatica755_Inhalt.qxd

4. Programming

It is possible to reprogram the following settings:
My coffee • Filter •Water hardness • Temperature • Automatic switch off •
Language • Rinse setting • Energy/ECO Mode
4.1 «My coffee» individual programming
(only for models 753/U27.53 and 755/U27.55)
It is possible to program the 1 and 2 cup buttons for coffee that suits your personal pre-
ferences (coffee strength/water quantity/water temperature).
• Press the programming button P in order to start program mode. The display shows
Program my coffee
• Press the ok button. Display shows my coffee flavour
• Press the ok button.
• Press the > button until the preferred setting appears in the display.
• Press the ok button.
• Press the > button until the display shows my coffee amount.
• Press the ok button.
• Press the > button until the preferred setting appears in the display
• Press the ok button.
• Press the > button until the display shows my coffee temperatur.
• Press the ok button.
• Press the > button until the preferred setting appears in the display
• Confirm with the ok button.
• Press the exit button. Display shows program my coffee
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.
Through pressing the 1-cup button (5) for about 3 seconds (until my coffee shows in
the display) you can now always get a cup of coffee that corresponds with the perso-
nal settings that you have selected (the same for 2 cups by pressing the 2-cup button
(6) for about 3 seconds).

4.2 Filter

Filter use

You receive a special filter as an accessory for the water tank of this coffee machine.
By using the filter correctly, it is no longer necessary to de-calcify your coffee machine.
32
21.9.2010
13:40 Uhr
The following function buttons under the display (1) are
used for programming:
P
Program mode
>
Selection button
ok Confirmation button
exit Stop or exit the programming
Seite 32

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

U27.51U27.53U27.55

Table des Matières