Troubleshooting; Disposal - Rotel Adagio 277 Mode D'emploi

7. Troubleshooting

Problem
It is not possible to – The jet (8) is plugged up.
draw of hot
water or steam.
Too little milk foam – You are using the wrong
or liquid foam.
Coffee just drips
out
The coffee is
missing its
«foamy layer».
Loud noise from
the coffee mill.
During the cleaning – Grounds in the central unit.
cycle the water
does not flow
through the coffee
outlet (9)
The on/off button
(3) and the steam
button (6) are
blinking at the
same time.
If you are unable to fix the problem yourself, please call our Service Hotline: 062 787 77 00.

8. Disposal

Please return your coffee machine to your local dealer, the service shop or to Rotel AG
for proper disposal.
34
Meaning
kind of milk.
– Milling is set too fine.
– Coffee is milled too fine.
– Not the right type of coffee.
– The beans are not fresh ground. – Use fresh ground beans.
– The milling fineness is not right – Fix the milling fineness (see 2.3).
for the coffee bean type.
– Foreign object in the milling
works, for example a pebble.
– The central unit is not correct
inserted or locked.
Remedy
– Clean jet thoroughly.
– Use cold milk with 15 %
fat content.
– Set the milling to a coarser
setting (see 2.3).
– Use coarser milled coffee.
– Change the type of coffee.
– Contact the Service Hotline.
– You can still use ground coffee.
– Clean the central unit in accor
dance with item 5.4
– Control and lock the central unit.