Programming Coffee Volume; Automatic Standby Mode - Rotel U220CH1 Mode D'emploi

o The indicator light around the coffee button flashes red while the appliance warms up.
Wait until it lights green.
o Make sure the drip tray is correctly assembled, it will click into place by itself.
o If you fold up the drip tray cover, you can place a big cup on the cup holder grid.
o Position the cup on the drip tray cover or the cup holder grid.
o Press the coffee button for an Espresso or press and hold the button for three seconds
for a Lungo.
o The preparation will stop automatically. To stop the coffee flow or top up your coffee,
press the coffee button again.
o Once the coffee is made, always expel the capsule afterwards. Capsules are automati-
cally expelled into the capsule collection tray by lifting the handle.
o If you want another coffee, insert a new capsule into the capsule gate.
o Empty the capsule collection tray and rinse the unit and tank frequently.
o Always turn off the coffee machine and disconnect it from the mains power supply
when not in use.

Programming coffee volume

o The coffee volume has been factory set at 30 ml for an Espresso and 60 ml for a Lungo.
o If desired, the coffee volume can be adjusted.
o Position the cup on the drip tray cover or the cup holder grid.
o To enter the programming mode, press and hold the coffee button for more than 10
seconds, the indicator light around the coffee button lights red and green.
o Next, press the coffee button to program the volume for an Espresso or press and hold
for three seconds to program the volume for a Lungo.
o Once the desired volume has been reached, press the coffee button again.

Automatic standby mode

o The appliance will automatically enter standby mode after nine minutes of non-use.
To 'wake up' the appliance, press the coffee button.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
34