Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS 38 Notice D'emploi

Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting Tools
1 STIHL AutoCut C 5-2 mowing head
2 STIHL AutoCut 5-2 mowing head
3 STIHL PolyCut 6-3 mowing head
4 STIHL FixCut 5-2 mowing head
Deflector
5 Deflector with line limiting blade for
mowing heads only (see "Mounting
the Deflector")
Handle
6 Loop handle
Harness/Shoulder Strap
7 Shoulder strap may be used
Cutting Tools
1
2
3
4
FS 38
Equipment
The complete trimmer includes:
– Cutting tool
– Deflector
– Handle
– Shoulder strap (special accessory)
Select the correct combination from
the table according to the cutting tool
you intend to use. Read the table
horizontally from left to right.
Deflector
5
To reduce the risk of injury from
thrown objects or blade contact,
never operate your unit without the
proper deflector for the cutting
attachment being used. To reduce
the risk of injury from loss of control
and / or contact with the cutting tool,
make sure your unit is equipped with
a proper handle for the type of cutting
attachment being used.
Only mowing heads (1, 2, 3, 4) may be
used on loop-handled trimmers with
a curved drive tube.
To reduce the risk of accidents and
injury, avoid contact with the rotating
cutting tool.
Handle
6
Warning!
Warning!
Shoulder Strap
7
English
15