Fitting The Harness - Stihl HLA 65 Notice D'emploi

Fitting the Harness

The type of harness is market-specific.
Shoulder Strap
Versions without telescoping shaft
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
HLA 65, HLA 85
Versions with telescoping shaft
1
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Attaching Machine to Harness
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
Detaching Machine from Harness
1
Press down the bar on the
N
carabiner (1) and pull the carrying
2
ring (2) out of the carabiner.
2
1
English
1
1
2
2
17