Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS 120 Notice D'emploi

English
Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting Tools
1 STIHL SuperCut 20-2 mowing head
2 STIHL AutoCut 25-2 mowing head
3 STIHL AutoCut 30-2 mowing head
4 STIHL TrimCut 30-2 mowing head
5 STIHL PolyCut 20-3 mowing head
6 STIHL FixCut 25-2 mowing head
7 Grass cutting blade 230-2
8 Grass cutting blade 230-4
9 Grass cutting blade 230-8
10 Brush knife 250
11 Scratcher tooth
circular saw blade 200
12 Chisel tooth
circular saw blade 200
Grass cutting blades, brush knifes and
circular saw blades made of any other
non-metal material are not permitted.
Deflectors
13 Deflector for mowing heads only
14 Deflector with
15 Skirt and blade for all mowing heads
(see 'Mounting the Deflector')
16 Deflector without skirt and blade
for all metal mowing tools and brush
knife
17 Limit stop for circular saw blades
18
Handles
18 Loop handle
19 Loop handle with
20 Barrier bar
21 Bike handle
Harnesses
22 Shoulder strap may be used
23 Shoulder strap must be used
24 Full harness may be used
25 Full harness must be used
Equipment
Among other parts, the complete unit
includes:
– Cutting tool
– Deflector
– Handle
– Harness
Select the correct combination from the
table according to the cutting tool you
intend to use. Read the table
horizontally from left to right. Other
combinations, e.g. reading the table
diagonally, are not permitted.
! Warning!
To reduce the risk of injury from thrown
objects and blade contact, never
operate your unit without the proper
deflector for the cutting attachment
being used. To reduce the risk of injury
from loss of control
and / or contact with the cutting tool,
make sure your unit is equipped with a
proper handle and harness for the type
of cutting attachment being used.
! Warning!
STIHL loop-handled brushcutters
without a barrier bar may be used only
with the above mentioned mowing head
with nylon line or plastic blades. To
reduce the risk of personal injury
through contact with the cutting tool,
other plastic or metal cutting tools, but
not circular saw blades, may be used
only on bike- handled brushcutters or
loop-handled brushcutters with a barrier
bar.
FS 120, FS 200, FS 250