Stihl FS 38 Notice D'emploi page 23

English
6
Starting
: Move stop switch to position I
: Press down the throttle trigger lock
and hold it there.
: Squeeze the throttle trigger until the
lug on the tongue (6) can be
engaged on the housing (arrow).
: Release the throttle trigger, tongue
and throttle trigger lock in that order.
This is the starting throttle
position.
22
9
8
: Set the choke lever (8):
g
For cold start to
For warm start to e
– also use this setting if the engine
has been running but is still cold.
: Press the fuel pump bulb (9) at least
five times – even if the bulb is
already filled with fuel.
: Place the unit on the ground: It must
rest securely on the engine support
and deflector. Check that the cutting
tool is not touching the ground or
any other obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly – your thumb
should be under the housing.
Do not stand or kneel on the drive
tube!
FS 38