Bar And Chain Combinations; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl HTA 50.0 Notice D'emploi

20 Bar and Chain Combinations

20 Bar and Chain Combinations
20.1 STIHL HTA 50.0 pole pruner
Pitch Drive link
gauge/groove
width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the pole pruner being used and the saw chain that is
mounted. The actual cutting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

22 Disposal

22.1 Disposing of Pole Pruner and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
23 EC Declaration of Con‐
formity
23.1 STIHL HTA 50.0 Pole Pruner
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless pole pruner
0458-813-9621-B
Length Guide bar
25 cm Rolloma‐
tic E Mini /
30 cm
Light 01
Number of Number of
teeth, spro‐ drive links
cket nose
8
– Manufacturer's brand: STIHL
– Type: HTA 50.0
– serial number: LA02
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, and 2014/30/EU and
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production: EN
55014-1, EN 55014-2, EN 62841-1, taking
account of EN ISO 11680-1 and EN 62841-4-1.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
– HTA 50.0 certification number: 40053008
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are indicated on the pole pru‐
ner.
Waiblingen, 11.08.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
24 UKCA Declaration of Con‐
formity
24.1 STIHL HTA 50.0 pole pruner
ANDREAS STIHL AG & Co. KG
English
Saw chain
56
71 PM3 (type
3670)
64
45