Staufenbiel Red Bull F4U CORSAIR Instructions De Montage page 34

EN
34
7. Test the motor make sure it is responsive to the
throttle input and rotate the counter clock wise from
the tail view, or you have to reset the transmitter.
INSTALL THE PROPELLER BLADE
1. The propeller and the spinner kit.
2. Fit the propeller blades to the backplate of the hub
with the decal side face up.
Note: The hub center of the backplate contain in a
hex notch.
3. Place the front
plate of the hub into
place.
halves fully hold into
4. Snap the hub to
make sure the hub
place.