Staufenbiel Red Bull F4U CORSAIR Instructions De Montage page 28

EN
Flap servo
in down position
Flap servo
in up position
28
9. The provided piece of fuel tubing keeps the clevis
closed during the flight.
Do all the linkages the same way in the model building
process.
10. Toggle and switch the flaps channel knob accor-
ding to which port the Y-harness you have inserted
into the receiver.
Note: To avoid the „buzz" sound from the flap
servos caused by the flap jam with the wing tailing
edge, install either the flaps linkage while the ser-
vo arm in up position. And make sure the trailing
edge of the flaps level with the wing root.