Urmet 2Voice 1083/40 Mode D'emploi page 9

SECONDARY:
OPENED DOOR
13/03/2010
In the example, the indication shows that the door of the secondary call station with ID = 13 and secondary
address 1 is open.
Use the buttons or (18) to scroll the list of open doors.
AUTO-ON FUNCTION
The switchboard provided with an optional video module can perform the auto-on function on main call
stations. This means that the switchboard attendant can establish a video connection (and also audio, if
required) with a main call station even if no one has called him from that station.
To perform the auto-on function, press the button
shows the image coming from the main call station with ID=0; to display images coming from the other
additional cameras of the main station 0 and then images coming from other main call stations, press again
the button (10). The display shows:
00 - SWTCHB
AUTO ON
13/03/2010
If the attendant wants to establish an audio communication with the main call station which is sending
images, he can pick the handset up, as if the switchboard had been called.
KEYPAD LOCK ACTIVATION / DEACTIVATION
If the attendant must leave his station, he can activate the keypad lock. To do this, press at the same time
the buttons SHIFT (16) and X (13).
KEYBOARD LOCKED
13/03/2010
If the keypad is locked, the switchboard does not execute commands from the keypad, included DAY/NIGHT
service switching and turning off. To deactivate the keypad lock, repeat the above described operation.
The keypad lock condition is kept even if the switchboard is unpowered and then powered.
16
13-1
15:30:30
(10); the additional video module of the switchboard
15:30:30
15:30:30
DS1083-017
DATE/TIME ADJUSTMENT
Date and time can be confi gured/changed by pressing at the same time the buttons SHIFT (16) +
The display shows:
DATE/TIME ADJUSTMENT
__/__/____
Date and time must be entered using the numeric keypad (12) as follows: Day/Month/Year/Hour/Minutes/
Seconds.
After entering the last digit of seconds, confi rm with the button
If date/time settings must not be changed, press the button X (13) for 3 seconds.
RINGER VOLUME
When the device is in standby mode, the ringer volume can be adjusted; for adjustment, keep the button
SHIFT (16) pressed and select the desired volume (1÷5) with the buttons
During volume adjustment, the display shows the following screen:
RING VOLUME:
PRESS ↓↑ TO SET
13/03/2010
CALL DIVERSION FUNCTION TO CORDLESS PHONE
It is possible to temporarily divert the switchboard call reception service (according to the operating status
day/night) to a cordless phone connected to an interface Ref. 1083/67, suitably connected to the system
and confi gured. To do this, press the function button SHIFT (16) + F1 or SHIFT (16) + F2 or SHIFT (16) +
F3.
§
The function buttons F1, F2 and F3 must be previously programmed for the function.
The display shows:
DIVERTED TO:
13/03/2010
where:
ddddd is the physical code of the interface Ref. 1083/67 which manages the call diversion. In this condition,
the telephone connected to 1083/67 can only answer the calls coming from apartment stations. If during
DS1083-017
__:__:__
(7).
and (18).
1
15:30:30
ddddd
15:30:30
(17).
17