Urmet 2Voice 1083/40 Mode D'emploi page 10

diversion the switchboard operating status is "day", from this telephone the attendant can also answer
calls coming from main call stations and open the door. In any case, calls can not be diverted to apartment
stations.
With the function "call diversion to cordless phone" active, from the switchboard the attendant can only
deactivate the function by pressing again the same button SHIFT (16) + button function which has activated
the call diversion.
DISPLAYING CODES AND NAMES IN CASE OF LOGICAL CODES OPERATING
MODE
If the switchboard is confi gured with logical codes, in all screens with user codes, these are displayed
with their logical code preceded by "L". If the code can not be displayed, the respective physical code is
displayed (i.e. without the prefi x "L").
For example, if a call is received from the main station 1 which has called the user of the column 14 with
dip switch set to value 123:
– if the received physical code 14123 in the switchboard directory is associated to the user ROSSI with
logical code 1000, the display shows:
01 - L1000
CALL FOR: L1000
ROSSI
13/03/2010
– if the received physical code 14123 in the switchboard directory is NOT associated to any user, the
display shows:
01 - 14123
CALL FOR: 14123
13/03/2010
18
15:30:30
15:30:30
DS1083-017
CONFIGURATION
To access the confi guration menu, keep the button SHIFT (16) pressed and press repeatedly and quickly
the button (4). The fi rst screen displayed is the screen for selecting the language.
To quit confi guration, keep the button X (13) for 3 seconds in any screen.
However, the switchboard quits the confi guration mode for time-out after 300 seconds of inactivity.
LANGUAGE
In this screen the language of switchboard interface can be selected.
LANGUAGE
ENGLISH
Press the buttons and (18) to select the desired language and press the button
and go to the next screen.
BUSY TIME
The value set in this screen defi nes the assured communication time, starting from the moment of the
answer to a call.
BUSY TIME
(1,10,20,30,...,70S)
To change the busy time, use the buttons
30s, 40s, 50s, 60s, 70s. This value must be the same as that confi gured in system call stations.
When the busy time has been selected, press the button
MONITOR PRESENCE
In this screen, it can be specifi ed if the optional additional monitor is present or not. Allowable values are
0=NO (no additional video module) and 1=YES (presence of additional video module).
MONITOR
(0=NO , 1=YES)
DS1083-017
10
and (18). 8 different timings can be set: 1s, 10s, 20s,
(7) to confi rm and go to the next screen.
1
(7) to confi rm
19