Urmet 2Voice 1083/40 Mode D'emploi page 6

OPERATING INSTRUCTIONS
TURNING ON AND OFF THE SWITCHBOARD
Case 1: switchboard without access password.
To turn the switchboard on, press the button
1083/40
In this screen the software version number is indicated below.
After 2 seconds, the switchboard starts operating in the mode active before it was turned off.
If the switchboard is in working mode DAY, the led (2) is on; if it is in NIGHT mode, the led (2) is off.
To turn the switchboard off, keep the button SHIFT (16) pressed while pressing the button
Case 2: switchboard with access password.
To turn the switchboard on, press the button
1083/40
In this screen the software version number is indicated below.
After 2 seconds, the following screen is displayed:
PASSWORD
13/03/2010
Enter the access password programmed by the installer and press the button
starts operating in the mode active before it was turned off.
If the switchboard is in working mode DAY, the led (2) is on; if it is in NIGHT mode, the led (2) is off.
If the password entered is wrong or if one minute is elapsed from power on, the switchboard turns off
again.
DAY / NIGHT MODE SWITCHING
To switch from DAY to NIGHT mode, keep the button SHIFT (16) pressed while pressing the button
The operating mode DAY is indicated by the led (2) which turns on, in NIGHT mode the led stays off.
10
. The display shows:
VER. 3.0
(1). The display shows:
VER. 3.0
15:30:30
(7). The switchboard
STANDBY
During standby, the display only shows date and time.
DISPLAYING NAME DIRECTORY AND CALLING A USER
When pressing the buttons
(1).
where:
xxxx progressive index of selected name
nnnn total number of names in the directory
yyyyyy
user name
To search for a name, scroll the list with the buttons
(12) to reach the fi rst user which name starts with the selected letter (for example, to search for the name
ROSSI, press an arrow button to gain access to the directory and the button 7 for 3 times to select letter R;
then search for the user with arrows).
To call the selected user pick the handset up and press the button
CALL FROM APARTMENT STATIONS
During a call coming from an apartment station, the switchboard rings and the display shows the following
screen:
where:
iiiii: physical code of the caller (Liiii – in case of logical code)
yyyyyy: caller name
(2).
The switchboard attendant can answer the call by picking the handset up; if he does not answer within 10
seconds, the call is stored in the call memory (50 max.).
DS1083-017 DS1083-017
13/03/2010 15:30:30
or (18), the display shows the following screen
NAME LIST: xxxx/nnnn
yyyyyyyyyyyyyyyyyyyy
yyyyyyyyyyyyyyyyyyyy
13/03/2010 15:30:30
or (18) or press an alphanumeric button
(7).
CALL FROM: iiiii
yyyyyyyyyyyyyyyyyyyy
yyyyyyyyyyyyyyyyyyyy
13/03/2010 15:30:30
11