Urmet 2Voice 1083/40 Mode D'emploi page 15

or, if the device has not answered:
MCM POLL.
ID CODE:
ABSENT !!
• By selecting with the buttons and
SCM POLL.
ID CODE:
ADDRESS:
Enter the ID code of the secondary call station, press the button
the button (7) to poll the device; after few seconds, the display will show the device status and FW
version:
SCM POLL.
ID CODE:
ADDRESS:
PRESENT FW: 3.0
or, if the device has not answered:
SCM POLL.
ID CODE:
ADDRESS:
ABSENT !!
28
2
(18) the value 3, the display shows the following screen:
03
0
(7), enter the address and press
03
0
03
0
DEFAULT VALUES AND RESTORE
The switchboard factory defaults are:
Language:
Busy time:
Monitor presence:
System confi guration:
Call repeat:
Communication interruption: no
Power-on password:
User code type:
Function buttons:
To restore these values, unpower the switchboard, keep the buttons X, 8, 6 pressed and power the
switchboard on waiting for few seconds. This operation does not delete the name directory.
PROGRAMMING VIA PC
The switchboard is provided with a USB port for easy programming of confi guration data and name
directory.
Access the confi guration menu by keeping the button SHIFT (16) pressed and pressing repeatedly and
quickly the button
Connect the switchboard to the PC where the software 2Voice_PC has been installed (it can be downloaded
from www.urmetdomus.com) and perform the programming procedure described in the instruction manual
of 2Voice_PC software.
DESCRIPTION OF CONNECTIONS
]
LINE connection to 2Voice system
]
POWER dedicated power supply 1083/20 connection
}
S+
call repeat signal
S-
TECHNICAL CHARACTERISTICS
Power supply (POWER):
Max. current consumption:
Max. switching voltage (S+, S-):
Max. switching current:
Operating temperature range:
DS1083-017 DS1083-017
Italian
30 seconds
no
no
disabled
no (000000)
physical
not programmed
(4).
48Vdc ±10%
140mA
30Vdc
100mAdc on resistive load
-5 ÷ 45°C
29