Urmet 2Voice 1083/40 Mode D'emploi page 11

To set this parameter, use the buttons
to the next screen.
SYSTEM CONFIGURATION
IN RISER
(0=NO , 1=YES)
Set YES with the buttons and (18) only if the switchboard is installed in a one-column system in
the following cases:
1) system with 0, 1, 2, 3 or 4 main stations (with interface Ref. 1083/75, if present) without secondary
stations and without column interfaces Ref. 1083/50;
2) system with a single column interface Ref. 1083/50 without connection LINE IN and with 0, 1, 2 call
stations.
Press the button (7) to confi rm and go to the next screen.
System configuration in column = YES
switchboard
power supply
power supply
call station
20
and (18) and press the button (7) to confi rm and go
0
System configuration in column = YES
switchboard
column
interface
power supply
call stations
System configuration in column = NO
column
interface
power supply
power supply
power supply
DS1083-017 DS1083-017
System configuration in column = YES
door units switchboard
power supply
interface
power supply
power supply
main call stations
column
secondary
interface
call stations
power supply
switchboard
power supply
main call station
secondary
call stations
21