Urmet 2Voice 1083/40 Mode D'emploi page 14

The progressive number of the current name and the total number of names stored in the memory appear
in the second row.
Scroll the list using the buttons and
changed. Follow the same procedure described in the section concerning name entering.
When all data have been entered, press the button
delete.
To delete a name, select 3 on the numeric keypad (12):
•
DEL. NAME
PHY:00012
ROSSI
PAOLO
Scroll the list using the buttons and
(7). After a confi rm request, the name will be deleted.
• To delete all the list stored in the memory, select 0 on the numeric keypad (12) and the display will show
the following screen for name deleting:
LIST DEL.
DELETE ALL NAMES?
(0=NO , 1=YES)
Press 1 on the numeric keypad (12) to delete all the names or 0 to cancel the operation and return to
the initial screen.
§
The confi guration is kept even if the list is deleted.
DIAGNOSTIC SERVICES (POLLING)
This screen allows to poll apartment stations (AS), main call stations (MCM) and secondary call stations
(SCM) present in the system:
POLLING
(0=NO POLLING
1=AS, 2=MCM, 3=SCM)
If the value 0 is entered, no query is performed and the switchboard returns to the beginning of the
confi guration menu.
By selecting with the buttons and
26
(18) and press the button (7) to select the name to be
(7) to confi rm and store data or press X (13) to
0001/0083
LOG:1000
(18) and select the name to be deleted, then press the button
0
(18) the value 1, the following screen is displayed:
Enter the apartment station physical code, press the button
the button (7) to poll the device; after few seconds, the display will show the device status and FW
version:
or, if the device has not answered:
• By selecting with the buttons
Enter the ID code of the secondary call station, press the button
the display will show the device status and FW version:
DS1083-017 DS1083-017
AS POLL.
PHYSICAL CODE:.....
INTERNAL CODE: .
(7), enter the internal code and press
AS POLL.
PHYSICAL CODE: 21000
INTERNAL CODE.: 1
PRESENT FW: 3.0
AS POLL.
PHYSICAL CODE: 21000
INTERNAL CODE.: 1
ABSENT !!
and (18) the value 2, the display shows the following screen:
MCM POLL.
ID CODE: 2
(7) to poll the device; after few seconds,
MCM POLL.
ID CODE: 2
PRESENT FW: 3.0
27