Publicité
ELITE SII
The inlets are situated exactly under the correspondent channel (left or right). Insert
the cable at the channel you want to use.
For IONOPHORESIS use only the Channel 1.
Electrode application
Take the electrodes from the original package; all new electrodes have a seal on
the package. Be sure that the device is off. To start, connect the two cable plugs to
the electrodes, then disconnect the electrodes from their position and apply them
on the skin. To place the electrodes correctly, see the pictures included in this
manual.
After the use, place the electrodes in their original position again.
ATTENTION: do not unplug the electrodes if the unit is working.
REV 5 DEL 16.10.2023
GENESY SII
LABELLING AND SYMBOLS
It refers to the manufacturer
Warning
This symbol indicates that the device complies with the
directives on medical devices (93/42/EEC 47/2007/EEC).
The number of the notified body is 0476.
It indicates that this is a class II device.
It indicates that this device has BF-type applied parts.
WEEE symbol (Waste of Electrical and Electronic
Equipment). Recycling symbol.
The WEEE symbol used for this product indicates that it
cannot be treated as a household waste. The proper
disposal of the product will contribute to protecting the
environment. For further information on the recycling of
this product, please contact the concerned office of your
local body, the household waste management company
or the store where the product was purchased.
It indicates that the product has been designed in
compliance with the directive 2011/65/EEC
DUO TENS
51
Publicité
