Publicité
to property or adjacent areas. When you
operate the product, keep away from bushes
and other objects.
WARNING:
instructions that follow before you use the
product.
•
Do not cut the grass when you move the product
in reverse, unless it is fully necessary. Always look
down and behind you before and while you move in
reverse. Look out for large and small obstacles.
•
Decrease the speed before you turn around a
corner.
•
Stop the blades when you move across areas that
you do not cut.
CAUTION:
instructions that follow before you use the
product.
•
Before you operate the product, clear the cold air
intake of the engine from grass and dirt. If the
cold air intake is blocked, there is a risk of engine
damage.
•
Move around stones and other larger objects
carefully and make sure that the blades do not hit
the objects.
•
Do not operate the product across objects. Stop
and examine the product and cutting deck if you
operate the product across or into an object. If it is
necessary, make repairs before you restart.
•
Only use the cruise control for forward travel on
smooth, straight surfaces.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
•
Use approved hearing protection. Long-term
exposure to noise can result in permanent hearing
impairment.
•
Use heavy-duty slip-resistant boots or shoes. Steel
toes are recommended. Do not use open shoes or
go with bare feet.
8
Read the warning
Read the caution
Read the warning
•
Use protective gloves when necessary, for example
when you attach, examine or clean the cutting
equipment.
•
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
•
Keep first aid equipment and fire extinguisher near.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly. Do a check of
the safety devices regularly. If the safety devices are
damaged, speak to your Husqvarna service agent.
•
Do not make modifications on safety devices. Do
not use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are damaged.
To do a check of the ignition lock
•
Start and stop the engine to do a check of the
ignition lock. Refer to
16 and To stop the product on page 18 .
•
Make sure that the engine starts when you turn the
ignition key to the start position.
•
Make sure that the engine stops immediately when
you turn the ignition key to the stop position (O).
Read the warning
To start the product on page
2311 - 002 - 27.09.2024
Publicité
