Publicité
To install the brackets for the grass
catcher
Assembly overview on page 12 for the correct
Refer to
fasteners for this task.
1. Install the left bracket with the 2 bolts.
2. Install the right bracket with the 2 bolts.
3. Put the left part (A) of the rod assembly in the hole in
the left bracket.
A
4. Carefully push the right bracket (B) to the right. Put
the right side (C) of the rod assembly in the hole in
the right bracket.
CAUTION:
brackets too much.
5. Install the 2 R-clips.
2311 - 002 - 27.09.2024
C
B
Do not push the
To assemble the grass catcher
1. Install the front frame (A) through the fabric loops (B)
on each side of the grass catcher.
2. Install the front frame to the brackets on the top
frame (C) with 2 screws (D) and 2 nuts (E) on each
side.
F
3. Attach the rubber tube elements (F) to the bottom of
the front frame.
4. Install the 2 struts (G) to the front frame and the top
frame with 2 clips (H) on each side.
5. Put the grass catcher handle down through the grass
catcher cover and the holes in the grass catcher
frame.
J
6. Install the screw (I) and the nut (J) in the tube of the
grass catcher handle.
7. Install the end plug (K) to the tube of the grass
catcher handle.
C
E
D
H
G
B
A
I
K
H
13
Publicité
