Publicité
Troubleshooting schedule
If you cannot find a solution to your problems in this
operator's manual, speak to your Husqvarna servicing
dealer.
Problem
The starter motor does not crank the
engine.
The engine does not start when the
starter motor cranks the engine.
2311 - 002 - 27.09.2024
Troubleshooting
Cause
The parking brake is not applied.
The cutting deck is engaged.
The main fuse is blown.
The ignition lock is broken.
The connection between the cable
and the battery is bad.
The battery is too weak.
The starter motor is damaged.
There is no fuel in the fuel tank.
The spark plug is damaged.
The ignition cable is damaged.
There is dirt in the carburetor or fuel
line.
The fuel filter is clogged.
Action
Apply the parking brake. Refer to
apply and release the parking brake
on page 17 .
Disengage the cutting deck. Refer to
To engage and disengage the cutting
deck on page 17 .
Replace the main fuse. Refer to
replace the main fuse on page 27 .
Speak to your Husqvarna servicing
dealer.
Make sure that the battery is connec-
To connect the
ted correctly. Refer to
battery on page 14 .
Charge the battery. Refer to
charge the battery on page 27 .
Speak to your Husqvarna servicing
dealer.
Fill the fuel tank with fuel. Refer to
fill fuel on page 15 .
Examine the spark plugs. Replace
the spark plugs if it is necessary.
To examine and replace a
Refer to
spark plug on page 24 .
Speak to your Husqvarna servicing
dealer.
Speak to your Husqvarna servicing
dealer.
Replace the fuel filter. Refer to
replace the fuel filter on page 23 .
To
To
To
To
To
33
Publicité
