1. Open the engine cover to get access to the fuel filter.
2. Close the fuel shut-off valve.
3. Compress the fuel tank hose to prevent leakage.
4. Move the hose clips away from the fuel filter with a
pair of flat pliers.
5. Pull the fuel filter from the hose ends. A small
quantity of fuel can leak.
6. Push the new fuel filter into the hose ends. Apply
liquid detergent to the ends of the fuel filter to make
the connection easier.
7. Push the hose clips against the fuel filter.
To clean and replace the air filter
Note:
The illustration shows one type of air filter.
The air filter on your product can be different, but the
procedure is the same.
1. Turn the 2 knobs ¼ turn counterclockwise.
24
2. Remove the air filter cover.
3. Carefully remove the air filter.
4. To clean a foam air filter, do the steps that follow.
a) Remove the foam air filter from the air filter
cartridge.
b) Clean the foam air filter with a weak detergent.
c) Let the foam air filter become dry.
d) Install the foam air filter around the air filter
cartridge.
5. To clean a paper air filter, do the steps that follow.
a) Hit the paper air filter against a hard surface.
b) Blow with compressed air from the inner side of
the paper air filter.
CAUTION:
does not become clean, the paper air
filter must be replaced.
6. Install the air filter in the opposite sequence.
To examine and replace a spark plug
1. Open the engine cover.
2. Remove the spark plug cap and clean around the
spark plug.
If the paper air filter
2311 - 002 - 27.09.2024