Publicité
To remove and install the handle
1. Remove the 2 screws and the handle.
2. Install the handle in the opposite sequence.
To install the anti-scalp wheels
Assembly overview on page 12 for the correct
Refer to
fasteners for this task.
Introduction
WARNING:
safety chapter before you use the product.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.
To fill fuel
WARNING:
flammable. Be careful and refuel outdoors,
refer to
Fuel safety on page 10 .
WARNING:
a support area.
CAUTION:
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline. Do not use
gasoline that contains more than 10% ethanol.
2311 - 002 - 27.09.2024
Operation
Read and understand the
Gasoline is very
Do not use the fuel tank as
Incorrect type of fuel can
•
Install the anti-scalp wheel (A), the bushing (B), the
washer (C), the bolt (D), and the nut (E) in 1 of the 3
holes.
A
C
D
•
Do a check of the fuel level before each use and
refuel if it is necessary.
•
Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.
To adjust the seat
WARNING:
during operation of the product.
1. To adjust the seat forward and rearward, put your
feet on the footrest plates.
2. Push the lever below the front edge of the seat up
and move the seat to the correct position.
To do before you start the product
WARNING:
product, carefully read and understand
the safety instructions and the operation
instructions.
1. Do a check of the engine oil level. Refer to
check of the engine oil level on page 25 .
E
B
Do not adjust the seat
Before you operate the
To do a
15
Publicité
