Publicité
To get a good cutting result
•
For best performance, do maintenance on the
product regularly as given in the maintenance
Maintenance schedule on page
schedule. Refer to
20 .
•
Do not cut a wet lawn. Wet grass can give a bad
cutting result.
•
Do not use tire chains when you operate the product
with a cutting deck.
•
Make sure that the cutting deck is level. Refer to
adjust the parallelism of the cutting deck on page
30 .
•
If the grass is high, start with a high cutting height
and decrease it gradually.
•
Move the product forward at low speed if the grass is
high and thick.
•
Use full throttle when you cut the grass.
•
Cut the grass in an irregular pattern.
•
To get the best cutting result, cut the grass
frequently.
To empty the grass catcher
The product has an alarm that gives a sound if the grass
catcher is full. To stop the alarm, disengage the cutting
To engage and disengage the cutting
deck. Refer to
deck on page 17 .
1. Move the product to a location where you can empty
the grass catcher.
2. Make sure that the pedals are in the neutral position
and apply the parking brake.
3. Move the lock lever for the grass catcher to the
unlocked position.
2311 - 002 - 27.09.2024
4. Pull up the grass catcher handle to the highest
position.
To
5. Pull the grass catcher handle forward to tilt the grass
catcher and empty the grass.
6. Push the grass catcher handle rearward to lower the
grass catcher. Make sure that the grass catcher is
fully lowered.
19
Publicité
