Publicité
3. Carefully push the forward pedal (A) or the rearward
pedal (B). The speed increases the more the pedal
is pushed down.
Note:
The forward pedal and the rearward pedal
go back to their neutral position when they are
released.
4. Release the pedals to brake.
5. Select the correct cutting height. Refer to
cutting height on page 17 .
6. Engage the cutting deck. Refer to
disengage the cutting deck on page 17 .
To use the cruise control
Only use the cruise control for forward travel on smooth,
straight surfaces.
1. Push the forward drive pedal (A) down. Keep the
forward drive pedal in a position that gives the
correct speed for the terrain.
B
2. Pull the cruise control lock (B) up and hold it while
you release the forward drive pedal.
3. Release the cruise control lock to engage the cruise
control.
4. Push the forward drive pedal to disengage the cruise
control.
18
To use the reverse operation system
(ROS)
Note:
when the cutting deck is engaged, the engine stops
immediately. Engage the ROS to go rearward with the
product when the cutting deck is engaged.
A
B
1. Turn the ignition key counterclockwise to the ROS
To set the
To engage and
2. Slowly push down the rearward pedal to start
3. Turn the ignition key clockwise to the engine ON (I)
To stop the product
1. Disengage the cutting deck. Refer to
2. Turn the ignition key to the OFF (O) position.
A
3. When the product is stationary and the engine is
If you try to go rearward with the product
WARNING:
operate the product rearward, look down
and behind the product for the safety of
others.
position to engage the ROS.
movement.
position to disengage the ROS.
disengage the cutting deck on page 17 .
off, apply the parking brake. Refer to
release the parking brake on page 17 .
Before and while you
To engage and
To apply and
2311 - 002 - 27.09.2024
Publicité
