Publicité
To install and remove the grass catcher
1. Tilt the grass catcher and put it on the 2 brackets.
2. Make sure that the lock lever for the grass catcher is
in the unlocked position.
3. Release the grass catcher and let it move into
position.
4. Move the lock lever for the grass catcher to the
locked position. The grass catcher locks in position.
5. To remove the grass catcher, move the lock lever for
the grass catcher to the unlocked position. Lift the
grass catcher from the brackets.
14
To connect the battery
WARNING:
Make sure that the ignition switch is in
the off position and that the ignition key is
removed.
The location of the battery is above the left rear wheel.
1. Fold the seat forward.
2. Remove the 4 screws and the storage compartment.
3. Make sure that the red battery cable is installed to
the positive (+) terminal on the battery.
4. Remove the screw and the nut on the negative (-)
terminal on the battery.
5. Attach the black battery cable to the negative (-)
terminal on the battery and install the nut and the
screw.
6. Attach the terminal cover.
7. Install the storage compartment and the 4 screws.
Risk of electric shock.
2311 - 002 - 27.09.2024
Publicité
