Publicité
56 GB/IE
460437_2401_V3.0_silv_Blutdruckmessgeraet_Content_OS.indd 56
460437_2401_V3.0_silv_Blutdruckmessgeraet_Content_OS.indd 56
Measuring blood pressure
Note: To generate an informative profile of the development of
your blood pressure and to thus guarantee that you will be able
to compare the measured values adequately, measure your blood
pressure regularly and always at the same time of day. It is recom-
mended that you measure blood pressure twice a day: once in the
morning after getting up and once in the evening.
You should not eat, drink, smoke or be physically active in the
30 minutes before each measurement.
Before taking the first blood pressure measurement, always rest
for 5 minutes!
The measurement should always be taken in an adequate state of
physical rest. You should therefore avoid taking measurements at
stressful times.
Furthermore, if you wish to take multiple measurements one after the
other, always wait at least 1 minute between each measurement.
Repeat the measurement process if the measured values seem in-
correct.
Bring the device to room temperature before taking measurements.
Only place the cuff on the upper arm. Do not place the cuff on
other body parts.
The blood pressure monitor can only be operated with batteries.
Please be aware that data transfer and data storage are only pos-
sible if your blood pressure monitor is powered on. If the batteries
are drained, the date and time will be deleted from the blood
pressure monitor.
Attaching the cuff
ATTENTION! Only use the device with the original cuff. The cuff
is suitable for an upper arm circumference between 22 and 42 cm.
29.05.24 10:51
29.05.24 10:51
Publicité
