Publicité
Function
Area View works between 0-9 mph (0- 5 km/h). When activated, the cameras capture the area around the vehicle. The
captured images are straightened out by the Peripheral Camera Control Module J928 because the raw images from the
wide-angle lens cameras are heavily distorted. The angle of view is then adapted to the desired perspective, also using image
processing. Finally, this corrected image is enhanced with "Helper" lines depending on the selected view. These lines show the
distances and to project the path ahead. Then the prepared image is displayed.
If there is a visible distortion of the image in the area where the camera views overlap, recalibrate the system.
Perform inspection for image distortion once the air suspension has settled at normal level and with the dampers
set to "Comfort. "
Guidelines
Depending on the selected view, static and dynamic guidelines are displayed.
These guidelines make it easier to estimate distances (red and green guidelines) and show the potential path depending on the
steering angle (yellow guidelines).
2m
1 m
0.4m
Exterior Camera
0.4m 1 m
2m
S470_132
Publicité
