Publicité
Multi-Function Camera
System Function
When Lane Assist is active, the system scans and evaluates the path of the road using the camera. If the vehicle gets close to a
recognized boundary line and there is a threat of it departing the lane, the driver is warned by a vibration in the steering wheel.
The system only warns once. A second warning is only issued if the vehicle has moved sufficiently away from the relevant
boundary line and has then approached it again. This avoids continual warnings when driving parallel to a road marking.
If, while the system is active, a turn signal is activated before a boundary line is driven over, the warning is suppressed. The
system assumes that the lane departure is intentional.
Aside from the steering wheel vibration, the driver of the Touareg can see a visual representation of detected and violated
(driven over) boundary lines in the instrument cluster display.
System Messages
Active mode:
• Road marking detected on left
S470_062
Active mode:
• Road marking detected on right
• Road marking not detected on
S470_064
Passive mode:
• Road marking not detected on
S470_066
and right
left
left or right
Active mode:
• Road marking detected on left
and right
• Warning threshold on right
exceeded
S470_068
Active mode:
• Road marking detected on
right
• Road marking not detected on
left
• Warning threshold on right
S470_070
exceeded
A warning will only be issued if a road
marking is detected or the boundary line is
crossed.
Publicité
