Publicité
Park Distance Control 360°
Park Distance Control uses ultrasonic sensors to alert the
driver of objects in front of and behind the vehicle when
parking or backing up. In this section we will discuss the
system that has 360° visibility.
Function
The 360° PDC monitors and displays the front, rear and
sides of the vehicle.
The system is activated and deactivated:
• Using
the Parking Aid Button E266
• By engaging Reverse gear or
• When the vehicle rolls backwards or
• When the system detects an obstacle in the front area
at speeds below 6 mph (10 km/h), for example, when
driving slowly into a garage
• If a door is opened
• If a PDC sensor fails
The Infotainment display of the side areas is calculated
from the PDC sensors because their scanning does not
include the vehicle sides. Objects that appear on the sides
are remembered from the front or rear sensors, and move
along the side based on driving direction, steering angle
and the ABS system (distance).
or
Ultrasonic Sensor
Publicité
