BRAVILOR BONAMAT B5 Mode D'emploi page 96

8. CORRECTING MALFUNCTIONS
In case of malfunctions first consult the
malfunctions tables. If the problem cannot be
solved, consult your Bravilor Bonamat dealer,
your service mechanic or one of the service
desks.
8.1 Malfunctioning analysis general
Symptom:
1. Nothing appears on the
di display. l
2. At switching on the machine
with the main switch, the
temperature setting flashes
with the figures 00.
3. Time is not set correctly.
4. The machine does not work
according to the timer.
32
version 1.0
WARNING
n Check first to determine if the malfunction has
a mechanical or electrical origin. Work and
repairs on the electrical system may only be
carried out by a trained and authorized
service technician.
LIST OF MALFUNCTIONS
Possible cause:
The switch (E.) is off.
The supply voltage has been
interrupted.
The machine will first start
calibrating to ensure an
optimum setting.
All B−machines are standard
provided with a timer, see
§ 7.3.7. This must, however, be
activated.
Actions:
Switch ON/OFF switch (E.) ON.
Connect the supply voltage.
Wait until the machine is ready
("25 minutes).
Set the correct time and day,
see § 7.3.6.2.
Activate the timer, see § 7.3.7.
ECopyright Bravilor Bonamat B.V.