BRAVILOR BONAMAT B5 Mode D'emploi page 79

The selection is made as follows:
)⇓
D Press keys (M. and (N.)
and hold them down.
− The current day and time appear for a
moment on the display (fig.11 ).
− Subsequently, the next pre−programmed
time setting appears on the display (fig.12 ).
TIP
− When in the extended programming menu,
§ 7.3.7, no time settings have been
programmed, the current day and time remain
visible on the display.
)⇓
D Press key (M. and (N.)
pre−programmed setting if necessary.
D The default setting is OFF. If the set values are
good, then press key (H.), OFF is changed into
ON.
− An enter symbol appears ↵ on the display.
The clock in the display starts flashing and
the system will make coffee at the set time.
The waiting mode appears on the display
(fig.13 ).
D Now press the confirmation key (L.) to confirm.
− The clock in the display starts flashing and
the system will make coffee at the set time.
The waiting mode appears on the display
(fig.13 ).
TIP
− If the settings are not good, they can be
changed once−only (§ 7.1.2).
D In the waiting mode the current day and time
can be viewed. Press the selection keys (M.
⇑
and (N.) simultaneously and hold them down
for about 2 seconds.
D The current day and time appear on the
display (fig.11 ).
ECopyright Bravilor Bonamat B.V.
⇑
simultaneously
⇑
to select another
)⇓
G
H
I
J
K L M
Fig. 13 Waiting mode timer
TIP
− The selected time setting has been protected
against termination between times. However,
the setting can be cancelled. This can be
done as follows:
D Press stop key (K.) and keep it down for
about 5 seconds.
− The protection is cancelled now.
Coffee can be made again in the normal way.
N
15
version 1.0