BRAVILOR BONAMAT B5 Mode D'emploi page 67

1.2.1 Coffee−making system
The machine is provided with a coffee−making
system operated through the operating panel
(fig.3 ). After the filter unit fitted with filter cone (if
available), paper filter and ground coffee (P.) has
been placed on the container, the coffee−making
system is switched on with one of the selection
keys (G.−J.). The value belonging to the selected
selection key is indicated on the display (O.). The
coffee making has started.
The water required is heated in a continuous flow
system and then poured over the ground coffee in
the filter pan via a spray head. Subsequently, the
coffee coming from the filter is collected in the
coffee container (U.) indicating the level in the
container through the gauge glass (V.). The
heating element mounted in the coffee container
keeps the coffee at the right temperature.
With the help of the coffee discharge tap (X.) the
coffee is then tapped.
The coffee−making system has an automatic
descaling signal. This is indicated on the display
(fig.4 ). In this way the system can be descaled at
the desired time by properly trained,
authorized users.
ECopyright Bravilor Bonamat B.V.
The control system makes it possible to keep an
accurate record of the amount of water used.
These day or total countings can be read through
the limited programming menu, § 7.2.
G
H
I
J
K L
M
Fig. 4 Display with descaling signal
coffee−making system
N
3
version 1.0